Mandalika's scratchpad [ Work blog @Oracle | My Music Compositions ]

Old Posts: 09.04  10.04  11.04  12.04  01.05  02.05  03.05  04.05  05.05  06.05  07.05  08.05  09.05  10.05  11.05  12.05  01.06  02.06  03.06  04.06  05.06  06.06  07.06  08.06  09.06  10.06  11.06  12.06  01.07  02.07  03.07  04.07  05.07  06.07  08.07  09.07  10.07  11.07  12.07  01.08  02.08  03.08  04.08  05.08  06.08  07.08  08.08  09.08  10.08  11.08  12.08  01.09  02.09  03.09  04.09  05.09  06.09  07.09  08.09  09.09  10.09  11.09  12.09  01.10  02.10  03.10  04.10  05.10  06.10  07.10  08.10  09.10  10.10  11.10  12.10  01.11  02.11  03.11  04.11  05.11  07.11  08.11  09.11  10.11  11.11  12.11  01.12  02.12  03.12  04.12  05.12  06.12  07.12  08.12  09.12  10.12  11.12  12.12  01.13  02.13  03.13  04.13  05.13  06.13  07.13  08.13  09.13  10.13  11.13  12.13  01.14  02.14  03.14  04.14  05.14  06.14  07.14  09.14  10.14  11.14  12.14  01.15  02.15  03.15  04.15  06.15  09.15  12.15  01.16  03.16  04.16  05.16  06.16  07.16  08.16  09.16  12.16  01.17  02.17  03.17  04.17  06.17  07.17  08.17  09.17  10.17  12.17  01.18  02.18  03.18  04.18  05.18  06.18  07.18  08.18  09.18  11.18  12.18  01.19  02.19  05.19  06.19  08.19  10.19  11.19  05.20  10.20  11.20  12.20  09.21  11.21  12.22 


Friday, October 22, 2004
 
Solaris: Resetting Forgotten Root Password

Need physical or remote console access to the system to use these steps:
  1. Press Stop-A on the console or Ctrl-] and send brk from a remote console connection to access the Open Boot Prompt (OBP)
  2. Insert a bootable Solaris CD and boot into single-user mode with boot cdrom -s
  3. Make a mount point within the /tmp file system by typing mkdir /tmp/mnt
  4. Mount the root partition of the boot disk in /tmp/mnt.
    ex. mount /dev/dsk/c0t0d0s0 /tmp/mnt
  5. Edit /etc/shadow with vi /tmp/mnt/etc/shadow
  6. Remove the encrypted part of the root password (the second field; fields are separated by colons), save, and exit
  7. Unmount the file system with umount /tmp/mnt
  8. Reboot the system and assign a new password at a shell prompt with the passwd command
If you are unable to run vi above, you can edit /etc/shadow using the ed editor

# ed /tmp/mnt/etc/shadow
1p
s/:.............:/::/ (Note: there are 13 dots in the second field)
1p
w
q



Comments: Post a Comment



<< Home


2004-2019 

This page is powered by Blogger. Isn't yours?