Mandalika's scratchpad [ Work blog @Oracle | My Music Compositions ]

Old Posts: 09.04  10.04  11.04  12.04  01.05  02.05  03.05  04.05  05.05  06.05  07.05  08.05  09.05  10.05  11.05  12.05  01.06  02.06  03.06  04.06  05.06  06.06  07.06  08.06  09.06  10.06  11.06  12.06  01.07  02.07  03.07  04.07  05.07  06.07  08.07  09.07  10.07  11.07  12.07  01.08  02.08  03.08  04.08  05.08  06.08  07.08  08.08  09.08  10.08  11.08  12.08  01.09  02.09  03.09  04.09  05.09  06.09  07.09  08.09  09.09  10.09  11.09  12.09  01.10  02.10  03.10  04.10  05.10  06.10  07.10  08.10  09.10  10.10  11.10  12.10  01.11  02.11  03.11  04.11  05.11  07.11  08.11  09.11  10.11  11.11  12.11  01.12  02.12  03.12  04.12  05.12  06.12  07.12  08.12  09.12  10.12  11.12  12.12  01.13  02.13  03.13  04.13  05.13  06.13  07.13  08.13  09.13  10.13  11.13  12.13  01.14  02.14  03.14  04.14  05.14  06.14  07.14  09.14  10.14  11.14  12.14  01.15  02.15  03.15  04.15  06.15  09.15  12.15  01.16  03.16  04.16  05.16  06.16  07.16  08.16  09.16  12.16  01.17  02.17  03.17  04.17  06.17  07.17  08.17  09.17  10.17  12.17  01.18  02.18  03.18  04.18  05.18  06.18  07.18  08.18  09.18  11.18  12.18  01.19  02.19  05.19  06.19  08.19  10.19  11.19  05.20  10.20  11.20  12.20  09.21  11.21  12.22 


Friday, April 22, 2016
 
Solaris 11: Few Random Commands

Logical Domains
Dependencies & Dependents
Network & Power Consumption Stats
HBA Listing

Dependencies

In the following example, dummy domain depends on two domains -- primary domain for virtual disks and virtual network devices, and dom2 for virtual disks and SR-IOV virtual functions (VF).

# ldm list-dependencies dummy
DOMAIN            DEPENDENCY        TYPE
dummy             primary           VDISK,VNET
                  dom2              VDISK,IOV

-l option displays the actual devices.

Dependents

-r option in list-dependencies sub-command shows the dependents for the logical domain(s). -l option displays the actual devices in here too.

eg.,

# ldm list-dependencies -r -l dom2
DOMAIN            DEPENDENT         TYPE           DEVICE
dom2              dummy             VDISK          primary-vds0/vdisk0:vol_dummy_disk0
                                    VDISK          service-vds0/vdisk0:vol_dummy_disk0
                                    IOV            /SYS/IOU1/PCIE14/IOVIB.PF0.VF1
                                    IOV            /SYS/IOU1/EMS4/CARD/NET0/IOVNET.PF0.VF1

Network Statistics

list-netstat sub-command in ldm utility displays the statistics for all the network devices that are configured in the domain(s).

eg.,

# ldm ls-netstat dom2
DOMAIN
dom2

NAME               IPACKETS     RBYTES       OPACKETS     OBYTES
----               --------     ------       --------     ------
net4               444.42M      61.27G       444.42M      7.12G
net1               13.20M       4989.22M     0            0
net0               0            0            0            0
..
ldoms-net0.vf1     37.62M       6.44G        49.15K       3.97M
ldoms-net0.vf0     523.34K      90.15M       62.85K       14.67M
ldoms-net1.vf15    0            0            0            0
..

List HBAs

list-hba sub-command in ldm utility lists out the physical SCSI HBA initiator ports in the target domain. -t option shows SCSI transport medium type such as FC or SAS.

eg.,

# ldm ls-hba -t  primary
NAME                                                 VSAN
----                                                 ----
/SYS/IOU0/EMS1/CARD/SCSI/HBA0/PORT1
        init-port w5080020000016331
        Transport Protocol SAS
/SYS/IOU0/EMS1/CARD/SCSI/HBA0/PORT2
        init-port w5080020000016331
        Transport Protocol SAS
...

Check the latest man page for ldm(1M) for the complete list of options for those sub-commands.

Power Consumption Statistics

ldmpower command shows the breakdown of power consumed by processors and memory in different domains or in a given domain. Note that ldmpower is an independent command, not part of ldm utility.

eg.,

# ldmpower -c processors -c memory -l primary
Processor Power Consumption in Watts
DOMAIN          15_SEC_AVG      30_SEC_AVG      60_SEC_AVG
primary         313             315             317

Memory Power Consumption in Watts
DOMAIN          15_SEC_AVG      30_SEC_AVG      60_SEC_AVG
primary         594             595             595

As usual, check the man page ldmpower(1M) for details.


PCI Devices

Scan & List

scanpci utility scans PCI buses and reports configuration settings for each PCI device that it finds.

eg.,

# scanpci -v

pci bus 0x0002 cardnum 0x06 function 0x00: vendor 0x111d device 0x80ba
 Integrated Device Technology, Inc. [IDT] Device unknown
 CardVendor 0x0000 card 0x0000 (Card unknown)
  STATUS    0x0010  COMMAND 0x0147
  CLASS     0x06 0x04 0x00  REVISION 0x03
  BIST      0x00  HEADER 0x01  LATENCY 0x00  CACHE 0x10
  MAX_LAT   0x00  MIN_GNT 0x03  INT_PIN 0x00  INT_LINE 0x00
  Bus: primary=02, secondary=03, subordinate=72, sec-latency=0
  I/O behind bridge: 00000000-03ffffff
  Memory behind bridge: 00100000-2000ffff
  Prefetchable memory behind bridge: 100000000-777f0ffff

pci bus 0x0003 cardnum 0x00 function 0x00: vendor 0x8086 device 0x1521
 Intel Corporation I350 Gigabit Network Connection
 CardVendor 0x108e card 0x7b18 (Oracle/SUN, Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP)
  STATUS    0x0010  COMMAND 0x0146
  CLASS     0x02 0x00 0x00  REVISION 0x01
  BIST      0x00  HEADER 0x80  LATENCY 0x00  CACHE 0x10
  BASE0     0x00100000 SIZE 1048576  MEM
  BASE3     0x00200000 SIZE 16384  MEM
  BASEROM   0x00280000 SIZE 524288
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x00

...

SRU
IDRs

Detect & Show Installed

Identifying Solaris 11 SRU level is one of the popular topics and it was covered in Solaris 11 documentation, My Oracle Support (MOS) and elsewhere by numerous bloggers. After all this, we still have to wonder why there isn't a conscious effort by the development team that owns pkg utility to make this a bit easier for normal human beings. In any case, pkg list entire or pkg info entire commands show a cryptic version string with a bunch of information encoded including the SRU level.

The second numeral in "branch" version represents the Solaris update whereas the third numeral is the SRU.

eg.,

In the following example, Solaris update is 3 (running Solaris 11 - hence it is a Solaris 11.3 system) and current SRU is 5. (I underlined every alternate field)

# pkg info entire | grep -i branch
        Branch: 0.175.3.5.0.6.0

IDRs

IDRs (Interim Diagnostic Reliefs) are in reality package updates whose names usually start with "idr" - therefore, just checking for the string "idr" in the list of installed packages on the system is sufficient to list out what IDRs were installed on the target system.

# pkg list idr*
pkg list: No packages matching 'idr*' installed <-- no IDRs installed

(Ticket Stub CSS Theme Credit: Kia Skretteberg)

Labels:




Comments: Post a Comment



<< Home


2004-2019 

This page is powered by Blogger. Isn't yours?